Lapua 300 Win Mag Brass For Sale
Lapua World-class brass begins with superior raw materials and smelting and metallurgical expertise. The emphasis on quality control is consistent with Lapua’s exacting standards throughout the manufacturing process. Hardness, solidity, and grain structure are all given special consideration. According to the Commission Internationale Permanente, the agency that oversees ammunition and component manufacturers in Western Europe, all Lapua brass is tested to 30% overpressure. This is not a loaded round.
300 Win Mag Lapua Brass Preparation:
When purchasing bulk rifle brass, you may notice a few case mouths that are “out of round” or slightly dented below the shoulder. These flaws appear after the case mouth has been annealed during the final tumbling wash operation. Brass manufacturers are aware of the case cosmetics and have worked to mitigate them, but denting may still occur due to equipment design. Minor dents are typically removed during the first firing and have no bearing on case life or performance. On non-plated brass, you may notice that not all of the anneal stain has been polished off, giving the case neck a pinkish color. The case mouths of some smaller caliber cases may be slightly belled.
Straighten out the case and case mouth on all new rifle brass before chamfering and deburring the case mouth inside and out. Straighten the case mouth by inserting it partially into the sizer die and allowing the expander ball to straighten the brass. Make sure to lubricate the case neck inside the case mouth to keep it from stretching.